Euphonix MixView CS3000 Manual de Instalação descarregar pdf (Página 12)

Section 2: Automation Editing

2 - 6 Euphonix CS3000/2000 MixView 3.0 Software Supplement

On-The-Fly

Using Cue/Locate points

From the T/C menu press [F4] (Cue). Use the Numeric keypad, the [+]/[-] keys

or the SpinKnob to select a cue number from the cue list and press [Enter].

Again, use [F1] to toggle between “Start” and “End”. For detailed information

on the Locate/Cue system refer to the CS3000/2000 Operation Manual.

While in the T/C menu, toggle to “Start” and play the T/C source. At the

desired point in the program, press [Enter] in the Numeric keypad to capture a

timecode value. The menu will automatically toggle to “End”. Press [Enter]

again at the desired point to capture a timecode value. Should the start time

need to be updated, the menu must be manually toggled back to “Start” using

F1.

From the top-level Pass Control menu, the DSC Numeric [7] key enters a

“Start” value while the Numeric [8] key enters an “End” value.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 84 85

Sem comentários

Euphonix MixView CS3000 Manual de Instalação Página 12