Euphonix MixView CS3000 Manual de Instalação descarregar pdf (Página 29)

Section 4: The Audio Cube

Euphonix CS3000/2000 MixView 3.0 Software Supplement 4 - 23

Lowers Only - This mode assigns Cube inputs to the Mix Controller’s lower

faders only. If there are fewer lower faders than Cube inputs, the remaining

Cube inputs are not assigned.

Uppers Only - This mode assigns Cube inputs to the Mix Controller’s upper

faders only. If there are fewer upper faders than Cube inputs, the remaining

Cube inputs are not assigned.

Wrapped [n] - Cube inputs are assigned to lower faders up to the channel

number in brackets. The remaining inputs are assigned to the upper faders.

Select the “wrap point” using the SpinKnob or [+]/[–] keys then press [F3] to

enter.

Lower/Upper - This mode divides the Cube inputs evenly between lower and

upper faders. Assignment starts with input 1 to channel 1 lower fader, then

input 2 to channel 1 upper fader. Assignment of inputs continues alternating to

lower then upper faders until all Cube inputs or all faders are assigned (which-

ever comes first).

L/U Chan [n] - Cube inputs are assigned starting at lower fader 1 in an

alternating Lower/Upper fashion always assuring that [n] number of lower

faders will have Cube input assignments.

Select the lower fader number using the SpinKnob or [+]/[–] keys, then press

[F3] to enter:

F3F1 F2 F4

L/U [16] [Yes]

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 84 85

Sem comentários

Euphonix MixView CS3000 Manual de Instalação Página 29